Concealed Undermount
Drawer Slides
The Dynamic NT concealed undermount slide from Mepla-Alfit is available in either SELF-CLOSE single or full extension or SOFT-CLOSE full extension.
SELF-CLOSE uses a spring loaded mechanism to pull the drawer shut when it reaches the last couple of inches of travel.
SOFT-CLOSE adds a concealed piston to slowly draw the drawer smoothly and silently closed. (Full extension only).
For use with wooden drawer boxes, these slides mount underneath and are completely concealed. They are low profile and smooth operating with a load rating of 66 lb per pair single extension and 88 lb per pair full extension.
The drawer box is held to the slide using a hole drilled into the back of the drawer plus a front fixing bracket which allows for height adjustment of 2.5 mm.
The drawer box is constructed with its bottom inset 10mm from the bottom of the box. Minimum installation depth is drawer length plus 10mm.
Note: This slide is designed for frameless cabinetry. If used in a face frame cabinet, a filler strip will be needed to provide a mounting surface flush with the edge of the face frame.
